I’ve often been asked about my process for tweaking photos. I thought I’d use one of my favorite photos and show how I took it from initial capture to final public display. I had forgotten how far I had taken this image from its initial capture:As with all tools, there are many ways to accomplish the same thing. I found a set of techniques that work really well for taking a photo that doesn’t have the best light or isn’t shot at the perfect time of day and amping it up. You may have better or different techniques to accomplish similar things and I say to you things like, “Keep the hope alive.” And: “Awesome!”
I generally don’t like writing Photoshop tutorials, because my assumptions about everything are usually wrong. In this case, I wanted to write a fairly straightforward tutorial, but after showing a draft to Heather, decided to rework it substantially, with more screenshots and better explanations of the steps. This is not a beginner tutorial for Photoshop. This is an advanced tutorial. I hope it doesn’t frustrate you or confuse you.
—You have access to Photoshop and know your way around some of the palettes. In particular, the Layer Palette. There are several buttons at the bottom of the Layer Palette. There are two that I’ll be making reference to; 1) The New Layer/Duplicate Layer and; 2) the Adjustment Layer button.
When I mention duplicating layers below, I mean you select the thumbnail/icon of the layer you want to duplicate and drag it to the New Layer button (#1 in the above illustration). This duplicates the layer and positions it above the layer you clicked and dragged.
—You have a photo that you’d like to tweak.
—You aren’t afraid to play around with sliders and settings.
Taking the picture
I might muck about with some settings on the camera, but I want to capture the vision in my head as close as I can while I’m in the moment. I might think about post-processing, but that’s pretty rare. I usually make a mental note of the kind of thing I want, click the shot and move on. This isn’t always the best way to work, but it’s how the image I’m using in this tutorial evolved.
So here’s our starter image:Photoshop time
The photo has pretty flat light and not a lot of mood. I love the low angle and of the six shots I took of the building and hydrant, this image shows the most promise by far. That pesky tall grass really is distracting. In my first sharing of this photo, I left it in throughout the processing. Big mistake. It’s out. I’m going to use the stamp tool and get rid of a few strands of tall grass. Since this is optional on whatever you might be working on, I’ll skip all the technique and screenshots, as that would likely be enough information to be its own tutorial. After several hours of painstaking use of the stamp tool it’s time to perform an Unsharp Mask:
This is an entirely subjective thing. Use the three sliders to make your image sharper, without making it look like it came out of a digital camera circa 1997. Which would look like ass. Avoid looking like ass. I use the Amount and Radius settings to get what I want. There are times when the Threshold slider can help, but for speed, it’s all about a .4 to .9 pixel radius and a setting between 80% and 150% on the Amount slider. As with all the steps, the values you might use depend on your image resolution and degree of sharpness you want:
With that, we are here:
Time to Blur
The image is still very flat and there is very little contrast. Let’s take the layer we did the work on and duplicate it by selecting the layer and dragging it to the New Layer button. This will create the third layer in the image on top of the source/Background and the copy of the source we just finished working on. The Layers Palette looks like this:
Apply a Gaussian Blur:
I know. Still a little dark, but we’re building a foundation. Of love:Mask It: It’s Like Cheese!
This step will rectify the darkness somewhat and is going to require some layer masking and painting on the masked portion of the layer. To do this, we’ll duplicate the blurred layer (the layer I’ve called “blur”) and add a Layer Mask to this new layer, selecting “Reveal All” in the submenu:The effect we’re trying to get is to make the blacks darker and then mask out the parts of the image we want to keep light. This is where the drama and focal points come into play. In our case, the building and the hydrant are the two focal points we want to emphasize. This is what I saw in my head when I took the shot and what I want to achieve with the rest of the steps.
Your Layer Palette should have a mask icon next to the thumbnail of the image:
I took this shot after I did the work, to show what a Layer mask icon in the Layer Palette looks like. I used the brush tool and selected a basic brush with a blurred fall-off:
Make sure you select the mask icon in the Layer Palette before you start brushing, as you’ll destroy your masterpiece and want to throw things. Important: Masks are painted in grayscale, so I usually paint with black selected as the brush color and use varying flow rates and brush sizes to mask. In this case, I’ve painted black over the building and the hydrant. You’ll notice that it masks out the dark layer we just created and reveals the lighter layer underneath:Save the Drama
As you can see, there are a ton of options to play with. We’re going to start with Selective Color, as I want to bump up the yellows and reds:Still not quite where it needs to be, but much closer. I’d share shots of the color selections I did, but it’s always different for every photo. So while you can see my settings, they wouldn’t necessarily apply to the image you might be working on. Remember, it’s non-destructive. So tweak away. After we’re done, the Layers Palette looks like this:
We need to add some contrast, and I like using Levels for this, because I can control the blacks, whites and midrange with more precision than just using Brightness/Contrast. We’ll add another Adjustment Layer by clicking on the button in the Layer Palette and selecting “Levels”. This looks just like the regular Photoshop “Levels” command under the image adjustments submenu. Except this is non-destructive and as an Adjustment Layer, holds your settings should you want to tweak them later. After we do the Level adjustments, our Layers Palette looks like this:
Which gives us:Almost Done
We’ll take the blurred layer that isn’t masked and duplicate it. So we’ll be selecting the layer called “blur”, dragging it to the New Layer/Duplicate Layer button. Once the layer is created, we’ll drag it in the Layer Palette so that it is at the top of the palette, above the two adjustment layers we just made. Our Layers Palette looks like this:
Then we’ll select this layer and do the Lighting Effects:
Set the transparency on this layer to Overlay and the Opacity to 33%:
We are almost there. It still needs just a touch of lightening overall, and I like to use Curves to accomplish this. We’ll make a new Adjustment Layer by clicking the icon in the Layers Palette and selecting “Curves”. A simple adjustment lightens up the image enough to recapture some of our highlights. Our Layer Palette looks like this:
And boom. We’re there. This concludes the Photoshop tutorial.
Also published on Medium.