Kanger DRIPBOX Starter Kit (All-In-One Mod Kit)
Drippers are great for flavor chasers, but dripping juice every five to ten puffs is not the most convenient way to enjoy vaping. The DRIPBOX makes it easier than ever to drip on an RDA without having to carry several bottles of liquid around.
The Kanger Dripbox starter kit is an all-in-one device that combines a squonk box (Dripmod) with a rebuildable dripping atomizer (Subdrip). In vaping parlance, a squonk box is a mod with a liquid bottle that sits at the bottom of the device. Instead of opening the top cover and dripping directly onto the coils, you squeeze the plastic bottle to push the juice up and feed the atomizer.
The Dripmod is fitted with a squonk bottle that can store a whopping 7ml of juice. It is located right where your fingers are gripping the mod so it's easy to access. Just give it a soft squish after every few puffs to keep the coils saturated.
Because the Dripmod is designed for those who are new to dripping, it has no adjustable wattage, voltage or temperature settings. It draws power from a single 18650 battery (sold separately) and fires a regulated output of 60 watts.
The Subdrip is a hybrid device that is both a rebuildable and disposable dripping atomizer. Probably the first of its kind in the vaping industry, the Subdrip has a removable deck which you can replace with a pre-built 0.2Ω coil system that will soon be available at VaporHQ. These replacement drip coils are expected to be sold at the same price point as traditional replacement atomizers for Kanger clearomizer tanks. If you like building coils from scratch, you can still use the Subdrip like a traditional rebuildable atomizer.
Dripping has become a very popular vaping style because it does not mute the flavor of your juice by passing through a chimney. Dripping devices, however, can be complicated and difficult to use. With the arrival of the DRIPBOX, even the most inexperienced vapers can now enjoy the most flavorful vapors with just a click of a button.
Everything you need to get started with dripping is included in the Kanger Dripbox starter kit – except the 18650 battery. We highly recommend that you use batteries with a discharge minimum of 30 amps.
NOTE: The Dripmod and the Subdrip RDA are designed for each other. They are not compatible with other RDAs or tanks because of the unique bottom feeding technology. Using an incompatible atomizer tank may cause juice to leak down to the battery or mod.
The bottom half of the DRIPBOX kit is called the Dripmod. Made of aluminum zinc alloy and coated with a ceramic paint finish, this regulated mod is designed for novice vapers. Therefore, users have no control over voltage, wattage or temperature. Unlike most box mods, the Dripmod has no LCD screen for customizing settings.
The Dripmod's biggest advantage is convenience – a prominent fire button located on the side is all you need to operate the device. On a fully charged 18650 battery, the Dripmod will fire a constant output of 4.2 volts or 60 watts.
On the other side of the Dripmod is a squonk bottle that can store up to 7ml of e-liquid. Running through the center of the "tank" is a thin stainless steel tube that feeds the DRIPBOX atomizer every time you squeeze.
Underneath the Dripmod are two access doors – a threaded cap for the 18650 battery and a magnetic cover for the squonk bottle.
The bottom cap has a unique security feature that lets you shut down the Dripmod without removing the battery from the chamber. Raise the contact pin to fit the battery flush into the terminals, or lower the contact pin to disconnect power and prevent accidental firing when the DRIPBOX is not in use.
Although it is highly recommended to charge your 18650 batteries on an external device, the Dripmod provides internal charging through a USB port on the mod body.
Like any modern vaping device, the Dripmod features a suite of safety features such as 10-second cutoff, reverse battery polarity protection, low resistance protection (device won't work below 0.15 ohm), low voltage protection (minimum 3.2 volts), and short circuit protection.
The brass contact pin is gold plated for excellent connectivity with the DRIPBOX atomizer.
The Kanger Dripmod measures 80mm (H) x 45mm (W) with a standard diameter of 22mm.
The SUBDRIP RDA
The bottom half of the DRIPBOX kit is the Subdrip, a 22mm rebuildable dripping atomizer made of stainless steel and coated with a ceramic paint finish.
The Subdrip has four components: mouthpiece, barrel, build deck, and RDA base.
The mouthpiece of the Subdrip RDA features a wide bore drip tip that is fixed to the top cap. Unscrew this section to reveal the build deck when dripping the traditional way.
The middle section is a metal barrel that houses the build deck. There are two large air holes designed Cyclops-style, with each vent measuring a whopping 12mm x 1.5mm. Just twist the drip tip to close or open the air holes.
Pulling up the barrel will reveal a two-post build deck that's perfect for single coil or dual coil configurations. Three thick O-rings secure the deck into the RDA barrel to prevent leaking.
What makes the DRIPBOX so unique is its hybrid RDA – the Subdrip is both a rebuildable dripping atomizer and a disposable dripping atomizer.
Unlike most RDAs, the build deck of the Subdrip is not fixed to the base of the device. Special threads allow you to screw it in and out so you can replace the entire deck if you do not want to rebuild it with your own coil. The deck that comes with the Kanger DRIPBOX starter kit is already pre-assembled with two coils and organic cotton wicks. The entire bottom of the build deck is made of brass for excellent connectivity. VaporHQ will be selling these pre-made 0.2Ω build decks as soon as Kanger makes them available.
If you're into rebuilding coils, you'll have all the tools you need from the Kanger DRIPBOX starter kit including a mini screwdriver, extra screws, extra coils, and a sheet of organic cotton so you can build your own from scratch.
The build deck connects to an RDA base which features 8 juice holes around the well and a contact pin at the center. Every time you squeeze the Dripmod squonk bottle, e-liquid will emerge through the juice holes and pool under the coils and wicks – ready to be vaporized with full-bodied flavors.
The Subdrip is exclusively designed for the Dripmod. Because the contact pin of this RDA has a hole in the middle for drawing juice from the bottom, liquid could leak when it is used with a different mod.
Kanger DRIPBOX Starter Kit Features:
- Regulated mod with squonk box design
- Single-button operation
- Wattage output: 60W
- Voltage output: 3.7V
- Powered by a single 18650 battery (sold separately)
- Rebuildable and replaceable build deck
- RDA with bottom feed technology
- Minimum resistance: 0.2 ohm
- 7ml juice capacity
- Adjustable airflow
- Micro USB charging
- Low resistance protection
- Reverse battery protection
- Low battery warning
- Short circuit protection
- 22mm diameter
- Available in black, white and red colors
1 x Kanger Dripmod
1 x Kanger Subdrip RDA
1 x USB charging cable (non-passthrough)
1 x extra squeezy tank
1 x extra build deck installed with 0.2Ω dual coils
1 x sheet of cotton
2 x extra coils
2 x extra screws
1 x mini screwdriver
1 x authentication card
1 x user manual
1 x Couple of battery stickers